G586SP/G586SP AIO
42
Load BIOS Defaults
The “Load BIOS Defaults” option loads the troubleshooting
default values permanently stored in the ROM chips. These
settings are non-optimal and turn off all high performance
features. You should use these values only if you have
hardware problems. Highlight this option in the main screen
and press <Enter>. The message below will appear.
Load BIOS Defaults (Y/N)? N
If you want to proceed, press <Y> and the default settings
will be loaded.
Load Setup Defaults
The “Load Setup Defaults” option loads optimized settings
from the BIOS ROM. Use the Setup default values as stan-
dard values for your system.
Highlight this option on the main menu and press <Enter>.
The message below will appear.
Load Setup Defaults (Y/N)? N
Type <Y> and press <Enter> to load the Setup default
values.
Password Setting
If you want to set a password, make sure that the Security
Option under the BIOS Features Setup is set to “System” or
“Setup”. Refer to the BIOS Features Setup option for more
information.
Use the arrow keys to highlight the Password Setting option
and press <Enter>. The message below will appear.
Enter Password: