Patrol

There are four patrol tours to set for composing different preset positions. Each one lists up to 8 positions which can be programmed, and the camera moves to the programmed positions sequentially. The camera stops when it moves to the last preset position.

General

Tour nameRename the tour name.

Tour position

OrderThere are 8 orders to select for camera directions.

Select Pos.There are up to 32 preset positions to choose for each order.

RecallWhen you click Recall, the camera moves to position of the selected preset number.

ClearWhen setting specific preset number position to tour, click Clear to clear this direction information.

Clear AllBe careful! When you click Clear All, it will clear this tour all information out.

SetUse it to save the camera position to a preset number.

Set as default tourClick it on to set this tour as default.

Tour StartTo click Tour Start, and the camera moves on patrol tour.

Tour StopWhile the camera moves on patrol tour, click Tour Stop to stop the patrol tour. Carry out the following steps

1.Click “Order” to choose one of eight orders.

2.Click Select Pos. to set the preset position.

Page 68
Image 68
Digital Data Communications FCS-4400, FCS-4500, FCS-4300, FCS-4200, FCS-4100, FCS-4000 manual Patrol, General, Tour position