Light / Enter Button
PROGRAM Button
2004 Bay Collection
Owner’s Manual
Push the Light / Enter Button to control your Dynamic LED lighting. This includes both the Fountain and the Spa lights, which are synchronized to operate together. The lights have three basic Color Effects you can choose. Simply press the Light / Enter Button until you find the one you want. The Color Effects are:
•Color Fade Slow: This sequence rotates through all colors approximately once per minute. (Start up default)
•Color Fade Fast: This sequence rotates through all colors approximately three times per minute.
•Color Hold: Hold on any of the colors.
The default Color Effect is Color Fade Slow. Use the Light / Enter Button to change Color Effects as follows:
•Start on Color Fade Slow (default)
•Turn off for 1 second, back on again for Color Hold
•Turn off for 1 second, back on again for Color Fade Fast
•Turn off for 1 second, back on again for Color Hold
•Turn off for 1 second, back on repeats to Color Fade Slow
•Turn off for 5 or longer: start on Color Fade Slow
For your convenience and cost savings, the lights will automatically turn off after one hour. To reactivate the lights after they have been shut off by the timer, simply press the Light / Enter Button again. The lights will always start in the Color Fade Slow sequence after they have been off for more than 5 seconds to ensure they always remain synchronized.
The Light / Enter Button is also used to exit programming sequence whenever you have entered the programming mode by first pressing the Program Button.
The PROGRAM Button is used to initiate the time setting, filter programming, and other programming features.
For more information, see the section on “Programming the Scrolling Message Center.”
27
