Control Panel Reset

2004 Bay Collection

Owner’s Manual

Control Panel Reset

This function is used to completely reset the clock and all other system variables to the factory defaults. Please keep in mind that this resets all maintenance messages (clean filters, change water, etc.) as if the hot tub is being installed the day of the panel reset. To reset the control system all of the following buttons must be pushed within 3 seconds:

1.Push the ICON (logo) Button

2.Push the ENTER Button

3.Push the PROGRAM Button

The top line of the Digital Display Window will read “RESET PROGRAMMING?” The bottom line of the Digital Display Window will read “IF SO, PUSH ICON

4.Push the Dimension One ICON Button to reset the entire control system to factory defaults or do not touch a button for 10 seconds to exit.

Dynamic Massage Sequencer

The Dynamic Massage Sequencer is located in the Ultra Lounge of the models mentioned above. The sequencer directs a succession of 14 jets to six separate muscle groups.

When a sequence is chosen, a human figure with LED's defining each zone, will light, showing the active zones in that sequence. This allows you to preview the zones in the sequence before a selection is confirmed.

Control Panel Description

LIGHT Button

The LIGHT Button is used to turn the spa light on or off. The status light below

 

the button will illuminate when the light is on. The spa light may be turned on/off

 

with this button, or the one on the Top Side Control. They work interchangeably.

35

Page 41
Image 41
Dimension One Spas Bay Collection Dynamic Massage Sequencer, Control Panel Reset, Control Panel Description, LIGHT Button