Dimension One Spas Bay Collection manual Routine Equipment Maintenance, Draining Your Equipment

2004 Bay Collection

Owner’s Manual

Routine Equipment Maintenance

Draining Your Equipment

Risk of Accidental Drowning. Extreme caution must be exercised to prevent unauthorized access by children. To avoid accidents, ensure that children cannot use this system unless they are supervised at all times.

All models are gravity drained. Do not drain water onto your lawn or plants unless all of the bromine or chlorine has dissipated from the water. The sanitizer in your water will dissipate quickly by leaving the cover off and exposing the water to direct sunlight. Drain and replace your water every six months. For heavy water use, you may wish to change the water more frequently.

You may purchase an optional submersible pump from your dealer or from our Virtual Showroom at www.d1spas.com to provide quicker drainage.

Filter Cleaning

Before cleaning the filter element(s), place the spa in the “Standby” mode by pressing the Dimension One Spas ICON logo, found on the right side of the Top Side Control, for 5- seconds. You may also shut off the power to the spa by turning off the power at the GFCI.

Your D1 Bay Collection spa is equipped with two top access filter cartridges. We recommend that you clean the filters monthly as preventative maintenance.

Cleaning the Skimmer Canister

To clean the skimmer filter cartridge, remove the access lid covering the filter area. Lift the center float of the skimmer assembly until it is fully extended. Hold the centerpiece of the assembly and turn it counterclockwise until the flats of the basket are aligned with the securing tabs. Then pull the basket assembly straight up to remove. Next, remove the E-Z Lock Filter cartridge by twisting the cartridge 1/4 turn counterclockwise to its stop, being careful not to overturn the filter. Then lift the filter out of its canister. Clean the cartridge with a high-pressure garden hose. Every other cleaning, soak the cartridge in a filter cleaning solution, rinse it thoroughly, and reinstall it. Replace the skimmer basket assembly and the access

lid or cover. Exit the “Standby” mode by pressing Dimension Spas ICON logo for 5-seconds. After cleaning, run the pump for a few minutes at high speed, then return to the heating mode.

49