2004 Bay Collection
Owner’s Manual
8.Next, check the fittings on the two circulation pumps located at the bottom of the Lower Equipment Compartment to make sure they do not leak.
9.Remove the two bleeder valves. One is located in the skimmer area to the right side of the Top Side Control
and the other one is located across the spa in the UltraPure™ area on the left side of the Top Side Control. This will allow air to escape from the pumps.
10.Remove the cap from the UltraPure™ canister and the filter basket from the Weir Skimmer canister.
UltraPure™/Filter | Weir Skimmer/Filter |
11.Remove the foam blocks securing each filter.
12.Next, remove the
filters from the Weir Skimmer and the UltraPure™ canisters and fill your hot tub
by placing a hose into the empty UltraPure™ canister on the left side of the Top Side Control (Sarena Bay→) or on the left side of the fountain (Lotus Bay™).
13. Fill the spa until the water level is slightly below the bottom of the OptiMount® located next to the Skimmer/Filter Basket on the right side of Sarena Bay→ Top Side Control or the bottom of the
Lotus Flowers (located on the sides adjacent to the Top Side Control on the Lotus Bay™).
This is about 6” from the top of the spa.
56
