Pump

2004 Bay Collection

Owner’s Manual

Term Smart Heat

Pump

Selector Valve

Serial Number

Slice Valves /

Shutoff Valves

Smart Heat

Temperature

Sensor

Top Side

Control Panel

Unions

Venturi

Vision Cartridge

Water Return

Fittings

Weir Skimmer

Definition

Produces water flow through the heater, filter, sanitation system and the main jets in the spa. The pump will operate automatically during filtration and heat cycles. This pump can also be operated manually by depressing the “jets” pad on the topside control panel which will allow you to choose between two speeds

Low speed for efficient water circulation during heating and filtration modes, and for gentle jet resistance or massage action.

High speed for maximum jet action.

Located on the top edge of the spa, it diverts jet power from one area of the spa to another.

Please use the serial number (located on the left corner pedestal) in communication with your dealer.

Valves located within the spa’s internal plumbing, which are used by service personnel to shut off water flow to the heater and pumps. All valves must be completely open during normal operations.

(Available on Dimension One Spas only) Smart Heat optimizes heat recovery using the amperage that you have available. Along with computerized load sharing, that automatically recognizes the number of jet pumps in use, compares it with the available power, Smart Heat recognizes the difference between the set temperature and the actual water temperature, and adjusts the heater to optimize the heater output.

Measures the temperature of the water inside the spa. This temperature sensor is used to control the spa heater and the temperature is displayed on the spa side control panel.

Used to control temperature, pumps for jets, spa light, system clock, automatic filtration cycles, and other advanced functions.

Connects the spa plumbing to the equipment. The unions allow a service technician to remove equipment without cutting plumbing.

A device used to inject air into the water.

A safe, water sanitizer that can be used in place of chlorine.

In addition to the skimmer, the water return fittings provide water inlets to your spa pumps. DANGER – Never Block Or Remove Any Of The Water Return Fittings.

A floating water referencing device that skims debris from the surface of the water.

61

Page 67
Image 67
Dimension One Spas Bay Collection manual Term, Pump Selector Valve Serial Number Slice Valves Shutoff Valves, Definition