Dimension One Spas Bay Collection manual Electrical System, Symptom, Problem, Corrective Action

						2004 Bay Collection
							Owner’s Manual
Electrical System
		Symptom		Problem				Corrective Action
	Will not turn on		No power				Check circuit breaker and/or GFCI
	– in any mode
	Turns on by itself			Normal automatic daily				No action required
				power filtration, or anti-
				freeze cycle
	Light is out		Burned out bulb				Replace bulb
	Pump shuts			1.	Automatic timer			1.	Push JETS pad again to start another cycle
	down				has shut pump off
	unexpectedly		2.		Motor over-heated			2. If pump(s) will not restart when JETS pad is pushed, call for service
	while in use
					and automatic
					protective device				Make sure that the equipment panel vent area is not blocked. Vent blockage
					has shut down				can cause serious damage to your equipment.
					pump(s)
	3 flashing LEDs			Possible sensor errors				1.	Check water level
	appear on the						2.		Clean filter
	Top Side Control
								If problem persists:
							1.		Turn off power
							2.		Restart the system
								If problem persists:
									Call for service
	Spa lights always		Whenever the lights are					Because both lights are synchronized together, they always return to a “common
	start in the		turned off they always					starting point” after they have been turned off for more than five seconds. This
	default light		turn on in Color Fade					ensures that they will remain synchronized.
	sequence		Fast mode

63