Water Feature Button

Water Feature Button

Up / Down Buttons

2003 Sarena Bay

Export Owner’s Manual

When the Water Feature Button is pushed the pump controlling the fountain is activated. A second push will turn the pump off. Each time the Water Feature Button is pushed it activates a programmable, automatic shut-off cycle. The default time is 1 hour. Your choices are 1, 2, 3, or 4 hours.

See the section on Programming the Scrolling Message Center for details on changing the automatic shut-off cycle.

The automatic shut-off cycles are a safety device that will reduce wear and tear on your equipment and reduce energy costs by ensuring that your pumps don’t run constantly.

Feature

When the Up or Down Button is pushed to change the set temperature, the bottom left of the Digital Display Window will read “SET TEMP TO _ _ _° C”. After 5 seconds, the display will automatically display the current water temperature again. The water temperature may be adjusted from 15° C (59° F) and 40° C (104° F).

These buttons are also used to make custom selections when you are programming the Scrolling Message Center. See the section on Programming the Scrolling Message Center for more details on changing the your spa’s default settings.

Note

23

Page 29
Image 29
Dimension One Spas Sarena Bay manual Water Feature Button Up / Down Buttons