Flashing Display and/or “Check Water Level”
Erroneous Temperature on the Display
Ice
2003 Sarena Bay™
Export Owner’s Manual
DO NOT ENTER THE WATER if you see “3 flashing LEDs” on the Top Side Control and/or the message, “CHECK WATER LEVEL
Check the water temperature and if it is above 40° C (≅104° F) and DO NOT ENTER THE WATER.
DO NOT ENTER THE WATER if you see a temperature reading of 0°C (≅32° F) or 57.8° C (≅136° F) without first checking the actual water temperature with a separate thermometer. The system has detected a Temperature Probe Failure and the water may be too hot, or too cold, to safely use.
Contact your local Authorized Dimension One Spas Dealer, or authorized service center.
When “ICE CONDITION” and the water temperature are displayed on the Digital Display Window, the air temperature in the equipment can has gone below a
This is a normal hot tub function. No corrective action is necessary. This feature protects the spa from freezing.
Feature
Cooling |
| When “COOLING” and the water temperature are displayed on the Digital | |
|
| Display Window, the water temperature has reached 1° C (≅2° F) above the | |
|
| set temperature. The circulation pump and ozone generator will turn off to | |
|
| allow the water to cool back to the set temperature. This is a normal hot tub | |
|
| function. No corrective action is necessary. | |
|
|
|
|
|
| The circulation pump and ozone generator will be on while | |
|
| either jet pump is on. They will remain on for 30 minutes after | |
|
| the pump(s) turn off regardless of the water temperature. | |
|
| Note | |
|
| ||
|
|
| |
| The Dimension One Spas Scrolling Message Center Control has a battery |
| |
| the time of day for 30 days – even without an active power source. Additionally, it will also keep | ||
Feature | your custom programming commands for up to 40 years without power. This battery | ||
not provide power to heat or operate the hot tub. | |||
27
