TROUBLESHOOTING
MOWER CUT QUALITY:
There are many variables that can affect the cut quality of any riding mower. Type and conditions of grass, cut height setting, engine RPM and ground speed are some of the variables that interact creating differences in cut quality. Examination of one or more of the above will generally produce a quality cut.
The Troubleshooting Chart suggests practices and adjustments that may be helpful in improving cut quality. Your Dixon ZTR dealer is also available to provide assistance to you.
SITUATION | CAUSES | REMEDY |
Poor cut quality | Ground speed | Reduce mowing speed |
|
|
|
Poor cut quality | Incorrect engine to | Refer to page 40 for part numbers |
| mower deck belt |
|
|
|
|
Poor cut quality | Engine RPM too low | Increase engine RPM to maximum |
|
|
|
Poor cut quality | Dull or bent blade | Sharpen or replace as required |
|
|
|
Poor cut quality | Refer to page 31 for deck leveling | |
|
| procedure |
|
|
|
Poor cut quality | Grass buildup under | Clean out underside of mower deck |
| mower deck |
|
|
|
|
Poor cut quality | Improper blades | Refer to page 40 for part numbers. |
|
|
|
Poor cut quality | Uneven tire pressures | Refer to page 39 for correct tire |
|
| pressures. |
|
|
|
Page 45
