11 - APPENDIX
11.10 4-2 Examples
The following examples are the actual event codes a central station would receive. The full report would also include the account number and checksum.
When the central station receives this event code | It means |
1A | A Fire alarm is being reported on zone 10 |
2B | An Ambush alarm is being reported |
FB | A battery trouble is being reported |
F9 | A Trouble is being reported on zone nine |
11.11 4-2 Communication Format Configuration
The DMP
A report format sent to the receiver is defined as follows:
| 1234 | 56 | 7 |
|
| aaaa | f s | c | |
a | = | account number | ||
f | = | first digit | ||
s | = | second digit | ||
c | = | checksum |
11.12 Numeric Pager Message Formats
The following example shows individual page display components:
Pager Display -
00128 = account number
2 = Message ID
0 = Always zero
010 = Zone or area number
Message ID Descriptions
1 = Zone Alarm
2 = Zone Trouble
3 = Areas Arming
4 = Areas Disarming
6 = User Checkin
The examples below show a typical display for each of the pager report options:
Zone Alarm | Zone Trouble | Areas Arming | Areas Disarming | User Checkin |
Communication Attempts
Only one pager signal is sent to the pager terminal equipment at a time. For each pager message to be sent, the panel dials the first phone number and follows the steps detailed in the sections 3.19 and 3.20.
XR10 Programming Guide | Digital Monitoring Products | ||
|
|
| 2841 E. Industrial Drive Springfield, MO |
|
|
| 2841 E. Industrial Drive Springfield, MO |
22