Dolby Laboratories DVD26 manual Playing a disc, Locating a position on the disc

Models: DVD26

1 32
Download 32 pages 57.54 Kb
Page 9
Image 9

Playing a disc

To insert a disc

Hold down the button on the front panel, or the button on the remote control, to open the tray.

Place the CD in the tray with the label facing upwards.

Press the button on the front panel or the but- ton on the remote control to close the tray.

The front panel display shows the total number of tracks on the disc, the total duration of the disc, and the track- list.

To play a disc

Press the button on the front panel, or the button on the remote control.

Alternatively press one of the buttons 1-9 and, if requi- red, +10 on the remote control to start playing a specific track.

For example: To play track 16; press the +10 button fol- lowed by the 6 button. To play track 22; press the +10 button twice, followed by the 2 button.

While a disc is playing the front panel display shows the current track number and the elapsed time of the current track. The track number is flashing in the tracking list.

To stop play

Press the button on the front panel or the but- ton on the remote control.

HOW TO GET STARTED

To pause a CD

Press the button on the front panel or the but- ton on the remote control.

The symbol will disappear from the display but the track number in the tracklist will still be flashing

You can then resume play by pressing the button on the

front panel or the button on the remote control.

Locating a position on the disc

You can step between tracks to locate a particular track on the disc, or you can scan forwards or backwards to locate a position within a track.

To step between tracks

Press the or buttons on the front panel or the remote control.

The front panel display shows the number of the track as

you step.

To scan through the disc

Press once the button to reverse scanning or the button to start forward scanning. You can use the button on the front panel or the remote control

You can increase the scanning by pressing the button (reverse) or the button (forward) again. DVD, CD and Video CD have four scan speeds.

As you scan the disc, the front panel display shows the cur- rent track and the and position within the track.

Release the button to start playing from the position you have located.

5

DVD26 DVD AND CD PLAYER USER GUIDE

Page 9
Image 9
Dolby Laboratories DVD26 manual Playing a disc, Locating a position on the disc