Dolby Laboratories DVD26 About PAL, Video out, Angle Indicator, Screen Saver, Default setting on

About PAL

Most models of the newly developed countdown PAL TV system detect 50 Hz (PAL)/60 Hz (NTSC) and auto- matically switch vertical amplitude, resulting in a display without vertical shrinkage.

If your PAL TV does not have a V-Hold control, you may not be able to view NTSC disc because the picture may roll. If the TV has a V-Hold control, adjust it until the picture stops rolling. On some TVs, the picture may shrink vertically, leaving black bands at the top and bot- tom of the screen.This is not a malfunction; it is caused by the NTSC -> PAL conversion.

Video out

•Default setting: VIDEO

If you make a setting here that is incompatible with your TV, the TV may not display any picture at all. If this hap- pens either switch everything off and reconnect to the TV using either a composite video cable, or an S-Video cable, or reset the unit.

Option	Description
Video	Compatible with all TVs, but lowest quality of the three AV
	settings.
YUV	Almost the same quality as RGB, but can give better results.
	For use with the 21-pin SCART and Component Video out.
	(See pos. K and L in illustr. page 3)
RGB	If your TV is compatible, this setting gives the best
	picture quality.
	For use with the 21-pin SCART and Component Video out.
	(See pos. K and L in illustr. page 3)

AUDIO VIDEO SETUP LAN GEN PROG

TV-SCREEN	4:3 / LB
TV-SYSTEM	PAL
VIDEO OUT	VIDEO
ANGLE INDICATOR	YUV
SCREEN SAVER	RGB
BACKGROUND	BLACK
VIDEO OUTPUT SETUP
MOVE	SETUP : Exit

SETTINGS IN THE SETUP MENU

Angle Indicator

•Default setting: ON

Activates and deactivates the indicator. When set to On, the indicator appears on the front panel display when playback of a scene recorded from multiple camera angles is in progress.

If you prefer not to see the camera icon on-screen during multiangle scenes on DVD discs, change this setting to ‘Off’.

AUDIO VIDEO SETUP LAN GEN PROG

TV-SCREEN	4:3 / LB
TV-SYSTEM	PAL
VIDEO OUT	VIDEO
ANGLE INDICATOR	ON
SCREEN SAVER	OFF
BACKGROUND	BLACK
ANGLE MARK ON/OFF
MOVE	SETUP : Exit

Screen Saver

•Default setting: ON

If a constant image is displayed on a conventional CRT- type TV, it can “burn in” leaving a ghost image on the screen. Switch to ‘On’ to make sure that a constant image is not displayed for a dangerously long time.

AUDIO VIDEO SETUP LAN GEN PROG

TV-SCREEN	4:3 / LB
TV-SYSTEM	PAL
VIDEO OUT	VIDEO
ANGLE INDICATOR	ON
SCREEN SAVER	ON
BACKGROUND	OFF
SCREEN SAVER SETTING
MOVE	SETUP : Exit

15

DVD26 DVD AND CD PLAYER USER GUIDE