1.You may either wire direct into the junction box for

apermanent connection or wire a molded plug into the junction box for a plug-in connection.

a.If a Permanent Connection: Route the power supply line, previously installed to the roof opening, into the junction box on the ceiling template. Connect as described in paragraph 2.

b.If a Plug-in Connection: Use the electric supply line, of "D. Wiring Requirements", to power and electrical outlet installed, according to appli- cable law, at the end of the roof opening furthest from the junction box.

Important: Do not plug the molded cord in until you have completely installed the air conditioner and are ready for an operational check. (Operating Instructions)

•Route the molded plug set from the electric outlet into the junctions box insuring not to coil excess wire so it will block air flow. Connect the plug set to the terminal block as described in paragraph 2.

2.Connect the power supply line to the air conditioner at the terminal block provided in the junction box. Connect white to white, black to black and green to green or bare copper wire (L. N. and respectively).

3.Tighten the strain relief onto the power supply line to hold firmly in place. Be careful not to pinch and short wires.

Note:If optional electric heater is part of this installation, now is the time to install it. Installation instructions are provided with the electric heater kit.

4.Carefully push all excess wire back into the junction box and install cover onto the box with two blunt screws provided.

5.Plug the electrical conduit from the upper unit into the mating switch box connector. See FIG. 13.

6.Wrap wire tie around plug connector(s) to prevent removal in field service.

FIG. 13

 

Route Power Supply

 

Through Romex

 

Connector

 

 

Plug Conduit Into

 

Switch Box And

Install

Secure With Wire

Tie To Prevent

Cover

Removal

 

H.Air Distribution Box Installation

1.Remove the two return air grills and filters.

2.Slide the front end of the air box over the shafts of the thermostat and selector switch. See FIG. 14.

FIG. 14

Slide Air Box over Controls

3.Install four screws through legs in air box into the pre-punched holes in the ceiling template.

4.Install the return air grills and filters by simply push- ing them into place.

5.Install the two knobs provided on the ends of the thermostat and selector switch shafts.

6.The power supply to the air conditioner may now be turned "ON".

7.Your air conditioner is now installed and ready for operation. Please read the following instructions be- fore attempting to run the unit.

OPERATING INSTRUCTIONS

A.Controls

1.The Selector Switch has eight positions including "OFF". This controls fan speed, heating mode, and cooling modes. See FIG. 15.

FIG. 15

 

3

3

2

2

1

1

 

Selector Switch

2.The thermostat controls the compressor ON/OFF operation in cooling temperature range of 18.5° C to 32.5° C. See FIG. 16.

FIG. 16

Thermostat

Note: The thermostat does not control the unit optional electric heater if installed.

28

Page 26 Page 28
Page 27
Image 27
Dometic B3200 manual Air Distribution Box Installation, Secure With Wire, Slide Air Box over Controls, Thermostat
Page 26 Page 28

B3200 specifications

The Dometic B3200 is an advanced air conditioning unit designed specifically for recreational vehicles (RVs), providing efficient cooling and heating capabilities that ensure comfort during your travels. This model has garnered attention for its robust features, reliable performance, and user-friendly operation, making it a favorite among RV enthusiasts.

One of the standout features of the Dometic B3200 is its impressive cooling and heating capacity, which is vital for maintaining a comfortable indoor climate regardless of external weather conditions. The unit can effectively cool an RV space, providing relief during hot summer months, while its heating function ensures warmth during colder seasons. This dual functionality allows users to enjoy their RVs year-round, making it a versatile choice for various climates.

Furthermore, the B3200 incorporates state-of-the-art technology that enhances its efficiency and performance. The unit utilizes a powerful compressor and a high-efficiency fan, which work in tandem to ensure optimal air circulation. This not only contributes to faster cooling and heating but also minimizes energy consumption, allowing users to save on power usage during their trips.

Another key characteristic of the Dometic B3200 is its quiet operation. The design includes sound-dampening technology that reduces noise levels, ensuring that users can enjoy a peaceful environment inside their RV. This feature is particularly appreciated during nighttime or quiet moments, where excessive noise can be disruptive.

The Dometic B3200 is built with durability in mind, featuring a sturdy exterior designed to withstand the rigors of travel and outdoor conditions. The unit is also relatively lightweight, an essential factor for RV owners who need to maintain weight limits to ensure vehicle safety and fuel efficiency.

User-friendliness is another notable aspect of the B3200. The air conditioner comes with an intuitive control panel that allows for easy adjustments to temperature settings and operational modes. This simplicity means that even users unfamiliar with RV systems can operate the unit without hassle.

In summary, the Dometic B3200 is a highly efficient, dual-function air conditioning system that perfects the balance between comfort and convenience. With its state-of-the-art technology, quiet operation, and durable construction, it stands as an ideal choice for any RV owner looking to enhance their travel experience. Whether cruising through summer heat or winter cold, the B3200 ensures that comfort never takes a back seat.
Top Page Image Contents