Dometic RM 7605 L, RM 7651 L, RM 7655 L, RM 7601 L Retrofitting, Solar control input S+

6.9.3D+ connection and Solar Control connection

( RM 76x5L only ) D+ connection

The D+ control connection must be connected to the respective vehicle terminal (alternator signal while motor is running).

Solar control input (S+):

Connection only when using a solar system with a solar charging controller with AES output.

The respective solar charging controllers are available from a specialized dealer.

The “Solar” (S+) control connection must be connected to the respective terminal of the solar charging controller (AES output).

Cable cross-sections

There are no particularly high current flows via the D+ and S+ connection; therefore no particularly large cross-section is required for these connections (approx. 1mm²).

6.9.4Terminal strip DC connections (RM 76x1 and RM 76x5)

Connections:

A = Ground heating element DC B = Plus heating element DC C = Ground electronics

D = Plus electronics

(RM7605)

D+ = alternator signal

S+ = AES-input-control signal (solar charge regulator)

C D

Γ

12V DC heating-connection

permanent DC-connection			B
	C
		Η
	D
			A

12V DC heating-connection

6.9.5Retrofitting

RETROFITTING

From the manual energy mode to the automatic energy mode

For all RM 76x1 appliances (MES) there is an additional possibility for retrofitting to an RM 76x5 device with AES functions.

Please consult your nearest Dometic Customer Service or your specialist dealer.

26