6.4Installing the ventilation system
L 500
To install the ventilation grilles, cut two rectangles (451mm x 341mm) in the outer wall of the vehicle (for position of the cuts, see point 6.3).
1. Seal the mounting frame, making it waterproof.
2. Insert the frame and | 3. Insert the ventilation | 4. Lock the ventilation grilles. |
screw into position. | grilles. |
|
|
| |
5. Insert winter cover |
|
|
R 500
Measurements of roof exhaust R500
Length | Width | Height |
595 mm | 205 mm | 150 mm |
Roof cut out: 87mm X 507 mm
1.Seal the installation bays and screw them to the vehcile roof
2 . Place the hood in postion and screw it to the installation bays.
L 205
To install the ventilation grilles, cut a rectangle (451mm x 156mm) in the outer wall of the vehicle (for position of the cuts, see point 6.3).
Item 1 does not apply for installation framess with an integrated seal.
1. Seal the frame waterproof. 2. Screw on the frame. 3. Insert and lock the ventilation grilles.
21
