English
Settings
Tone/Pulse Dialling (UK only)
Select dialling type (tone or pulse). The default setting is tone dialling, dependant on your network system requirements this may not require changing.
This setting only applies to models purchased in the UK.
1.Press w ( R)
2.Scroll using 88/99 until w flashes in the display. Press 0
3.Press 0 repeatedly until the display shows 2/5.
4.Scroll using 88/99 to the desired setting (TONE/PULSE). Press
0 to confirm setting and move to the next programming sequence, alternatively.
5.Press w ( R) to exit the Menu system.
Line Adaptation
On some telephone networks and PBX systems, it may be necessary to adjust the microphone level.
If the telephone has been purchased in Australia this setting will be displayed as 2/4.
1.Press w ( R)
2.Scroll using 88/99 until w flashes in the display. Press 0
3.Press 0 repeatedly until the display shows 3/5. - UK (2/4 - Australia).
4.Scroll using 88/99 to the desired setting (A/B=normal, C=medium, D=low).
5.Press 0 to confirm setting and move to the next programming sequence, alternatively.
6.Press w ( R) to exit the Menu system.
20 | www.doro.com |
