English
Other
The Answering Machine Is Not Answering
Check that the unit is switched on
Check that the telephone cable and the mains adapter are correctly connected.
Check that the answering machine is not full.
The Answering Machine Does Not Respond to Remote Control
Check that the telephone you are using to remotely control the answering machine is a tone dialling telephone.
Some telephones only output a short tone beep when buttons are pressed, and this may not be enough to activate remote control. Please use a separate tone transmitter in these cases.
Also try holding the buttons down longer, approximately 1 second per digit.
I can’t hear the outgoing message very well
Record a new outgoing message.
Speak closer to the microphone when recording.
The line is disconnected when someone leaves a message:
An incoming message may be up to 120 seconds in length. After this time, the call will be disconnected.
If the caller pauses approximately 7 seconds or more, the call may be terminated, since the voice control function believes that the caller has hung up.
If the function Announcement only is activated the caller cannot leave a message.
If the telephone still does not work, contact the place of purchase. Don’t forget the receipt or copy of the invoice.
www.doro.com | 35 |
