English
Installation
Only for models with an extra handset (5065R+1/5055+1):
8.Connect the mains adapter to the Y socket of the charger pod and to an electrical wall socket.
9.Remove the battery cover from the back of the handset. Insert the batteries into the handset ensuring correct battery polarity is observed. Replace the battery cover.
10.Place the handset in the charger pod and charge the handset batteries without interruption for 24 hours initially (thereafter fully discharged handset batteries will take up to 14 hours to recharge).
11.ONCE CHARGED, if the range symbol in the display continually flashes please refer to page 18, Register a New Handset or Base Unit.
IMPORTANT!
Under power failure conditions, this telephone will not operate. Please ensure that a separate telephone, not dependent on local power, is available for emergency use. The earpiece of the handset may attract small ferromagnetic objects such as staples and pins, care should be taken when placing the handset near these items. Do not place the base unit in areas of high humidity or where it will be exposed to direct sunlight or other major heat sources. Only use with the supplied power adapter.
www.doro.com | 5 |
