English
Settings
Recall Button Timing
In some PBX installations, the timing of the Recall button may need to be adjusted. For normal domestic use, this setting should not require changing.
If the telephone has been purchased in Australia this setting will be displayed as 3/4.
1.Press w ( R)
2.Scroll using 88/99 until w flashes in the display. Press 0
3.Press 0 repeatedly until the display shows 4/5. - UK (3/4 - Australia).
4Scroll using 88/99 to the desired setting: = 100ms
= 270ms (UK) - 600ms (AU/NZ)
5.Press 0 to confirm setting and move to the next programming sequence, alternatively.
6.Press w ( R) to exit the Menu system.
PBX Function
This telephone has a PBX function that will automatically insert a pause between the first and second digits of the telephone number before dialling.
For example: When the function is activated (see below), dialling a phone
number ie: ”0123456”, the phone will dial: “0” followed by a pause, and
then the remaining part of the number: “123456”.
If the telephone has been purchased in Australia this setting will be displayed as 4/4.
1.Press w ( R)
2.Scroll using 88/99 until w flashes in the display. Press 0
3.Press 0 repeatedly until the display shows 5/5. - UK (4/4 - Australia).
4.Scroll using 88/99 to the desired setting (YES=on, NO=off). Press 0 to confirm.
5.Press w ( R) to exit the Menu system.
www.doro.com | 21 |