Draytek manual For Vigor2130n, Status, Explanation, Interface, Description

1.2.2 For Vigor2130n

LED		Status	Explanation
ACT		Blinking	The router is powered on and running
(Activity)			normally.
		Off	The router is powered off.
HPA		On	Hardware NAT is enabled.
		Off	Hardware NAT is disabled.
WAN		On	The WAN port is connected.
		Blinking	It will blink while transmitting data.
LAN1/2/3/4		On	The port is connected.
		Off	The port is disconnected.
		Blinking	The data is transmitting.
USB1/2		On	A USB device is connected and active.
		Blinking	The data is transmitting.
VPN	On		The VPN tunnel is active.
QoS		On	The QoS function is active.
WLAN		On	Wireless access point is ready.
		Blinking	It will blink while wireless traffic goes
			through.
WPS Button		On	Press this button for 2 seconds to wait
			for client device making network
			connection through WPS. When the
			LED lights up, the WPS connection
			will be on.
		Off	The WPS is off.
		Blinking	Waiting for wireless client sending
			requests for connection about two
			minutes.
Interface		Description
WLAN		Press the button once to enable (WLAN LED on) or
		disable (WLAN LED off) wireless connection.
WAN	Connector for accessing the Internet.
LAN (1-4)		Connectors for local networked devices.
USB	Connector for USB storage (Pen Driver /Mobile
		HD) or printer.

4 Vigor2130 Series User’s Guide