Draytek 2130 Vlan, Disable Automatic Aging, Age Time, MAC Table Learning, Static MAC Table Config

Disable Automatic Aging	Stop the MAC table aging timer, the learned MAC address will
	not age out automatically. The default setting is enabled. Check
	the box to disable this function if required.
Age Time	Delete a MAC address idling for a period of time from the
	following MAC Table, which will not affect static MAC
	address. Range of MAC Address Aging Time is 10-1000000
	seconds. The default Aging Time is 300 seconds.
MAC Table Learning	List the port members which apply dynamic learning
	mechanism or not.
	Auto - Enable this port MAC address dynamic learning
	mechanism.
	Disable - Disable this port MAC address dynamic learning
	mechanism, only support static MAC address setting.
	Secure - Disable this port MAC address dynamic learning
	mechanism and copy the dynamic learning packets to CPU.
Static MAC Table Config..	Specify static MAC address with VLAN ID to apply aging
	configuration.
	Delete - Click the button to remove the VLAN setting.
	VLAN ID - Specify the interface for the port members.
	MAC Address - It is a six-byte long Ethernet hardware address
	and usually expressed by hex and separated by hyphens. For
	example, 00 – 40 - C7 - D6 – 00 – 02.
	WAN/LAN1~4 - Check the port to apply this VLAN setting.

To add a new static MAC entry, click Add new static entry. A new entry will be shown as follows. Choose VLAN ID and type a new MAC address. Next, specify port member for this table. Finally, click OK to save the changes.

3.2.4 VLAN

Virtual LAN function provides you a very convenient way to manage hosts by grouping them based on the physical port. You can also manage the in/out rate of each port. Go to LAN page and select VLAN. The following page will appear. VLAN function is enabled in default.

Add New Private VLAN Click this button to add a new private VLAN. The router allows you to add up to 4 VLAN.

46 Vigor2130 Series User’s Guide