Draytek 2130 manual Management, Reboot System, Click this button to remove an NTP server

Delete	Click this button to remove an NTP server.
Click OK to save these settings.

4.11.7 Management

This page allows you to manage the settings for access control, access list, port setup, and SMP setup. For example, as to management access control, the port number is used to send/receive SIP message for building a session. The default value is 5060 and this must match with the peer Registrar when making VoIP calls.

Enable HTTP/HTTPS/SSH/ICMP Ping/FTP/SNMP Enable the checkbox to allow system administrators to login from the Internet. There are several servers provided by the system to allow you managing the router from Internet. Check the box(es) to specify.

Manager Host IP – Type the IP address for the host to perform the remote management.

Access List	You could specify that the system administrator can only
	login from a specific host or network defined in the list. A
	maximum of three IPs/subnet masks is allowed.
	List IP - Indicate an IP address allowed to login to the
	router.
	Subnet Mask - Represent a subnet mask allowed to login to
	the router.

4.11.8 Reboot System

The Web Configurator may be used to restart your router for using current configuration. Click Reboot System from System Maintenance to open the following page.

Vigor2130 Series User’s Guide 181