Draytek 2130 manual IP/Ethernet Length, means s target hardware address is equal to the SMAC

	0: means target hardware address is not equal to the
	SMAC address.
	1: means s target hardware address is equal to the SMAC
	address.
	Any: means any value is allowed.
IP/Ethernet Length	Specify whether frames/packets can meet the action
	according to the ARP/RARP hardware address length
	(HLN) and protocol address length (PLN) settings.

	0: means ARP/RARP frames/packets where the hardware
	address length is equal to Ethernet (0x06) and the protocol
	address length is equal to IPv4 (0x04) must not match this
	entry.
	1: means ARP/RARP frames/packets where the hardware
	address length is equal to Ethernet (0x06) and the protocol
	address length is equal to IPv4 (0x04) must match this
	entry.
	Any: Any value is allowed
IP	Specify whether frames/packets can meet the action
	according to their ARP/RARP hardware address space
	(HRD) settings.

	0: ARP/RARP frames where the hardware address space is
	equal to Ethernet (1) must not match this entry.
	1: ARP/RARP frames where the hardware address space is
	equal to Ethernet (1) must match this entry.
	Any: Any value is allowed.
Ethernet	Specify whether frames can hit the action according to
	their ARP/RARP protocol address space (PRO) settings.

0:ARP/RARP frames where the protocol address space is equal to IP (0x800) must not match this entry.

1:ARP/RARP frames where the protocol address space is equal to IP (0x800) must match this entry.

Any: Any value is allowed.

Vigor2130 Series User’s Guide 125