Draytek 2130 manual Ports Configuration

equal to or less than 15, or "No Limit". The unit of the rate can be either pps (packets per second) or kpps (kilopackets per second). The configuration indicates the permitted packet rate for unicast, multicast, or broadcast traffic across the switch.

4.4.2 Ports Configuration

This page is used to configure the ACL (Access Control List) parameters for each port. These parameters will affect data packets received on a port unless the data packets match a specific ACE (Access Control Entry).

Port	There is one WAN port and 4 LAN ports in Vigor2130. Here
	each port will be configured with different ID, action, rate
	limiter ID, port copy and etc.
Policy ID	Select a policy to apply to this port. The range for values is
	from 1 to 8. The default value is 1.

Action	Select whether forwarding is permitted ("Permit") or denied
	("Deny"). The default value is "Permit".

Vigor2130 Series User’s Guide 117