Draytek 2130 manual USB Application, Access Point Discovery, USB General Settings

3.6.5 Access Point Discovery

Vigor router can scan all regulatory channels and find working APs in the neighborhood. Based on the scanning result, users will know which channel is clean for usage.

Note: During the scanning process (about 5 seconds), no client is allowed to connect to Vigor.

The table will list channel, SSID, BSSID, Encryption type, Authorization type and the Signal strength of working APs in the neighborhood.

Channel	Display the channel for the scanned AP.
SSID	Display the SSID of the scanned AP.
BSSID	Display the MAC address of the scanned AP.
Enc	Display the encryption type of the scanned AP.
Auth	Display the authentication method of the scanned AP.
Signal	Display the strength (in percentage) of the signal of the
	scanned AP.
Scan	It is used to discover all the connected AP. The results will
	be shown on the box above this button.

3.7 USB Application

USB diskette can be regarded as an FTP server. By way of Vigor router, uses on LAN/WAN can access, write and read data stored in USB diskette. After setting the configuration in USB Application, you can type the IP address of the Vigor router and username/password created in USB Application>>FTP User Management on the FTP client software. Thus, the client can use the FTP site (USB diskette) through Vigor router.

3.7.1 USB General Settings

At present, the Vigor router can support USB diskette with versions of FAT16 and FAT32 only. Therefore, before connecting the USB diskette into the Vigor router, please make sure

78 Vigor2130 Series User’s Guide