Dukane 8110H user manual Source Name, Template

SCREEN menu

Item

Description

	Each input port for this projector can have a name applied to it.
	(1) Use the ▲/▼ cursor buttons on the SCREEN menu to select the
	SOURCE NAME and press the ► cursor (or the ENTER) button.
	The SOURCE NAME menu will be displayed.
	(2) Use the ▲/▼ cursor buttons on the
	SOURCE NAME menu to select the port
	to be named and press the ► cursor
	button. Right side of the menu is blank
	until a name is specified.
	The SOURCE NAME dialog will be
	displayed.
	(3) The current name will be displayed on
	the first line. Use the ▲/▼/◄/► cursor
	buttons and the ENTER (or the INPUT)
	button to select and enter characters.
	To erase 1 character at one time, press
	the RESET (or press the ◄ cursor and
SOURCE NAME	the INPUT buttons at the same time)
	button. Also if you move the cursor to the
	DELETE or the ALL CLEAR on screen
	and press the ENTER (or the INPUT)
	button, 1 character or all characters
	will be erased. The name can be a
	maximum of 16 characters.
	(4) To change an already inserted character, press the ▲ cursor
	button to move the cursor to the first line, and use the ◄/►
	cursor buttons to move the cursor on the character to be
	changed.
	After pressing the ENTER (or the INPUT) button, the character
	is selected. Then, follow the same procedure as described at
	the item (3) above.
	(5) To finish entering text, move the cursor to the OK on screen
	and press the ► cursor (or the ENTER / the INPUT) button. To
	revert to the previous name without saving changes, move the
	cursor to the CANCEL on screen and press the ◄ cursor (or the
	ENTER / the INPUT) button.

	Using the ▲/▼ cursor buttons switches the mode for the template
	screen.
	Press the ► cursor (or the ENTER) button to display the selected
	template, and press the ◄ cursor button to close the displayed
TEMPLATE	screen.
	The last selected template is displayed when the MY BUTTON
	allocated to the TEMPLATE function is pressed (44).
	TEST PATTERN ó DOT-LINE1 ó DOT-LINE2 ó DOT-LINE3
		
	MAP2 ó MAP1 ó CIRCLE2 ó CIRCLE1 ó DOT-LINE4
(continued on next page)

40