Dukane 8110H Searching an input signal, Selecting an aspect ratio,  For a computer signal

Operating

Searching an input signal

1. Press the SEARCH button on the remote control.

The projector will start to check its input ports as below in order to find any input signals.

When an input is found, the projector will stop searching and display the image. If no signal is found, the projector will return to the state selected before the operation.

COMPUTER IN 1  COMPUTER IN 2 VIDEO  S-VIDEO

SEARCH button

MY SOURCE/

VIDEO COMPUTER DOC.CAMERA

ASPECT AUTO SEARCH BLANK

MAGNIFY	FREEZE	PAGE		VOLUME
ON		UP
OFF		DOWN
KEYSTONE	MY BUTTON		2	MUTE
	1
POSITION				MENU

●While the ON is selected for the AUTO SEARCH item in the OPTION menu

(42), the projector will keep checking the ports in above order repeatedly till an input signal is detected.

Selecting an aspect ratio

1. Press the ASPECT button on the remote control.

Each time you press the button, the projector switches the mode for aspect ratio in turn.

For a computer signal

NORMAL  4:3  16:9  16:10  NATIVE

For a video signal, s-video signal or component video signal

4:3  16:9  16:10  14:9  NATIVE

For no signal

4:3 (fixed)

ASPECT button

MY SOURCE/

VIDEO COMPUTER DOC.CAMERA

ASPECT AUTO SEARCH BLANK

MAGNIFY	FREEZE	PAGE		VOLUME
ON		UP
OFF		DOWN
KEYSTONE	MY BUTTON		2	MUTE
	1
POSITION				MENU

●The ASPECT button does not work when no proper signal is inputted.

●The NORMAL mode keeps the original aspect ratio setting.

●The on-screen menu might be displayed outside of the image display area depending on the adjustment value of the ASPECT, D-ZOOM and KEYSTONE. Changing the values of ASPECT, D-ZOOM and KEYSTONE may fix the symptom.

17