Dukane 8110H user manual Option menu, Auto Search, Direct, Power on

OPTION menu

OPTION menu

From the OPTION menu, items shown in the table below can be performed.

Select an item using the ▲/▼ cursor buttons, and press the ► cursor (or the ENTER) button to execute the item, except for the items LAMP TIME and FILTER TIME. Then perform it according to the following table.

Item

Description

	Using the ▲/▼ cursor buttons turns on/off the automatic signal
	search function.
	ON  OFF
AUTO SEARCH	When the ON is selected, detecting no signal automatically cycles
	through input ports in the following order. The search is started from
	the current port. Then when an input is found, the projector will stop
	searching and display the image.
	COMPUTER IN1  COMPUTER IN2
	VIDEO ï S-VIDEO
	Using the ▲/▼ cursor buttons turns on/off the DIRECT POWER
	ON function.
	ON  OFF
	When set to the ON, the lamp in projector will be automatically
	turned on without the usual procedure (14), only when the
DIRECT	projector is supplied with the power after the power was cut while
POWER ON	the lamp was on.
	• This function does not work as long as the power has been
	supplied to the projector while the lamp is off.
	• After turning the lamp on by the DIRECT POWER ON function,
	if neither input nor operation is detected for about 30 minutes, the
	projector is turned off, even though the AUTO POWER OFF function
	(43) is disabled.

(continued on next page)

42