If you've lost your registered PC card, proceed as follows:
NOTE: Dukane or your dealer will provide you with your Release Code in exchange for your registered keyword and Request Code. See more information
at the end of this section.
1.Press and hold the POWER button for a minimum of two seconds.
The projector will be turned on and display a message to the effect that the projector is
2.Select [Projector Options] → [Security] from the menu and press hte ENTER button.
The Release Code input screen will be displayed as well as your Request Code (24 alphanumeric characters).
3.Enter your Release Code in the Release Code Input screen.
*If the projector is turned on by entering the Release Code, your Se- curity will be disabled.
NOTE:
*Some types of PC cards cannot be registered as your protect key.
*It is recommended that you register two or more PC cards in case you lose or damage your registered PC card.
*Formatting your registered PC card will disable your protect key function.
Using ChalkBoard
The ChalkBoard feature allows you to write and draw messages on a projected image. See page
NOTE: This feature is available only when using with USB mouse. See page E- 26.
Help
Contents
Provides an online help about how to use the menus. An underlined link means that you can move to an adjustment item directly.
Selecting the underlined link and pressing ENTER moves to the corre- sponding adjustment item.
Information
Displays the status of the current signal, and the lamp and the projector usage hours. This dialog box has three pages.
The information included are as follows:
[Page 1] | [Page 2] | [Page 3] |
Source Name | Signal Type | Remaining Lamp Time (%) |
Input Terminal | Video Type | Lamp Hour Meter (H) |
Entry No. | Sync Type | Filter Usage (H) |
Horizontal Frequency | Interlace | Projector Usage (H) |
Vertical Frequency |
|
|
Sync Polarity |
|
|
Tools
Provides tools for setting sleep timer, capturing images, displaying files or changing your background logo in a PC Card and drawing.
NOTE: The "Capture" and "PC Card Files" features are required for a PC card.
Using Sleep Timer
1.Select your desired time between 30 minutes and 16 hours: Off, 0:30, 1:00, 2:00, 4:00, 8:00, 12:00, 16:00.
2.Select “Set” and press the ENTER button on the remote control.
3.The remaining time starts counting down.
4.The projector will turn off after the countdown is complete.
NOTE:
•To cancel the preset time, set "Off" for the preset time or turn off the power.
•When the remaining time reaches 3 minutes before the projector is turned off, the "Projector will turn off in 3 minutes" message will be displayed on the bottom of the screen.
Using Capture
Allows you to capture an image from a source that is currently being displayed. The image is saved as JPEG in the PC card. When you se- lect Capture from the menu, you will get a tool bar. You can capture an image directly using the tool bar when the menu is not displayed.
See page
Using PC Card Files
The PC Card Files feature allows you to display a list of all the files stored in the PC card so that you can select a file you want to display. You can also sort files by file name or date, or display the file. See page
Changing Background Logo:
You can change the default background logo using the PC Card Files feature.
NOTE: File size must be 256KB or less. Other file formats than JPEG and BMP are not available. See page
NOTE: The progress indicator shows the percentage of remaining bulb life. The value informs you of the amount of lamp and projector usage respectively.
Remaining Lamp Time Display
When the remaining lamp time reaches 0, the Remaining Lamp Time bar indicator changes from 0% to 100 Hours and starts counting down. If the remaining lamp time reaches 0 hours, the projector will not turn on regardless of whether the lamp mode is set to Normal or Eco.
Returning to Factory Default
The Factory Default feature allows you to change adjustments and set- ting to the factory preset for source except the following:
All Data ......................... Reset all the adjustments and settings for
all the signals to the factory preset except Remaining Lamp Time, Lamp Hour Meter, Filter Usage, Projector Usage, Language, Background, Communication Speed, LAN Mode, Security and Password.
Including Entry List:
Also deletes all the signals in the Entry List and returns to the factory preset.
Current Signal ............... Resets the adjustments for the current sig-
nal to the factory preset levels.
All the items in "Picture", "Sound", "Image Options" and "Picture Management" can be reset.
