Samson 5100, 5179 Appendix, Co6: Sensor initialization, Co7: LON communication

Appendix

Co6: Sensor initialization

				Comments
Fb	Function	WE	Anl	Function block parameters / Range of values (default setting)
00	Sensor selection	ON	All	Co6 -> Fb00 = ON: Pt 100; Pt 1000
	general			Co6 -> Fb00 = OFF: Pt 100; PTC
01	Sensor input 1			Any sensor inputs that are different from the settings for
to	to			function block Fb00
17	sensor input 17
		OFF	All	Co6 -> Fb01 to Fb17 = ON: select:
				Outdoor temperature input:
				0/4 to 20 mA, 0 to 10 V = –40 to 50 °C
				Other temperature inputs:
				0/4 to 20 mA, 0 to 10 V = 0 to 160 °C
				Ni200, Ni1000, PTC, NTC, Pt1000, Pt100, 0/4-20, 0-10
23	Sensor calibration	OFF	All

Fb Function block, WE Default setting

Co7: LON communication

				Comments
Fb	Function	WE	Anl	Function block parameters / Range of values (default setting)
00	LON active	OFF	All	Co7 -> Fb00 = ON: LON interface active
01	Controller as	OFF	All	Co7 -> Fb01 = ON: Controller is defined as primary controller
	master controller			(processes the external demand as master controller)
				Co7 -> Fb01 = OFF: Controller is defined as secondary
				controller
02	Controller time	OFF	All	Co7 -> Fb02 = ON: Controller time = LON system time
03	Outdoor	OFF	All	Co7 -> Fb03 = ON: LON outdoor temperature 1
	temperature 1			Select: Terminal number of outdoor sensor
04	Outdoor	OFF	All	Co7 -> Fb04 = ON: LON outdoor temperature 2
	temperature 2			Select: Terminal number of outdoor sensor
05	Report operational	OFF	All	Co7 -> Fb05 = ON: Report fault alarms of other LON
	faults of other LON			participants
	participants

Fb Function block, WE Default setting

104EB 5179 EN