Samson 5100, 5179 operating instructions Appendix, Comments

Appendix

				Comments
Fb	Function	WE	Anl	Function block parameters / Range of values (default setting)
09	Pulse input for flow	OFF	Not	Co5 -> Fb09 = ON: Type of limitation
	rate or capacity		6, 9	Option: U: Flow rate limitation P: Capacity limitation
	limitation			CONST	Limitation constant
				4-Pt:	Limitation acc. to 4-point characteristic
				Function block parameter:
				Pulse weighting / 0.1 to 10 (10)
				Note: Can only be changed after entering key number
10	Locking manual	OFF	All	Co5 -> Fb10 = ON: Manual intervention not possible and
	levels			parameters cannot be changed
				Note: Can only be changed after entering key number
11	Limit monitoring of	OFF	All	Co5 -> Fb11 = ON: Function block parameters:
	a selected sensor			Terminal number
	input x			Upper/lower limit
				Signal edge, binary output
				FSr-A/FSr-E: Status alarm to error status register OFF/ON
				BA ON/BA OFF: Setting/not setting the binary input
				FALL/steig: Negative signal edge/increasing signal edge
12	Limit monitoring of	OFF	All	Co5 -> Fb12 = ON: Function block parameters:
	a selected sensor			Terminal number
	input y			Upper/lower limit
				Signal edge, binary output
				FSr-A/FSr-E: Status alarm to error status register OFF/ON
				BA ON/BA OFF: Setting/not setting the binary input
				FALL/steig: Negative signal edge/increasing signal edge
13	External demand	OFF	Not	Co5 -> Fb13 = ON: The highest set point is passed on;
			3, 5,	(only with Fb00 = ON possible, in systems Anl 6 and 9
			8	Fb00 = OFF)
				Function block parameter:
				Boost / 0 to 30 °C (0 °C)
				In systems Anl 6 and 9 the demand can only be sent

102EB 5179 EN