Samson 5100, 5179 operating instructions 1.4Displaying data, Operation

Operation

1.4Displaying data

Measured values, set points, times-of-use, public holidays and vacation periods can be re- trieved and displayed in the InF1 to InF9 information levels. The various displays are listed in section 11.4.

￿InF1:	Heating circuit 1
￿InF2:	Heating circuit 2
￿InF3:	Heating circuit 3
￿InF4:	DHW heating
￿InF5:	Primary control circuit
￿InF6:	Does not exist
￿InF7:	LON communication
￿InF8:	Error status register/sensor failure
￿InF9:	Communication
￿PU:	Pumps, manual level
￿bIn-E: Binary inputs and outputs
￿Error:	Alarms

Proceed as follows:

Select information level (–> Fig. 10 on page 141).

Confirm information level.

Select value you want to change.

Compare the set point/limit value and the actual value.

Press keys simultaneously:

to switch to the operating level.

10EB 5179 EN