Samson 5100, 5179 operating instructions Operation, Activate editing mode for times-of-use

Operation

0 1 2 3 4 5 6 7 8 9 10 11 12 13 14 15 16 17 18 19 20 21 22 23 24

0 1 2 3 4 5 6 7 8 9 10 11 12 13 14 15 16 17 18 19 20 21 22 23 24

01 2 3 4 5 6 7 8 9 10 11 12 13 14 15 16 17 18 19 20 21 22 23 24

STOP

Activate editing mode for times-of-use.

Display: 1–7

Select period/day for which the times-of-use are to be valid:

1–7 = every day,

1 = Monday, 2 = Tuesday, ..., 7 = Sunday

Activate editing mode for period/day.

Display shows: START; blinks

Edit start time (steps of 30 minutes).

Confirm start time. Display shows: STOP

Edit stop time (steps of 30 minutes).

Confirm stop time. Display shows: START

The second time-of-use is set like the first time-of-use.

To set the times-of-use for each day, repeat the instructions in the fields highlighted in gray.

Select End on the display.

Exit the datapoint for times-of-use.

Exit the parameter level.

Return to the operating level.

Note!

Do not use the 1–7 datapoints to check the programmed times-of-use. Otherwise, the times-of-use are reset to their default settings.

Note!

The controller automatically returns to the operating level if the keys are left unpressed for two minutes.

14EB 5179 EN