Dynalink RTA770W setup guide Windows 98/ME, Connect to Internet

ADSL Router Quick Set-up Guide

Windows 98/ME:

1.From Control Panel, double click Network. Scroll down to highlight TCP/IP -> (your network card). Click Properties.

2.Select the IP Address tab. Specify 192.168.1.x (x is a number you pick between 2 and 254). This is the IP address you assign to the computer. Subnet Mask is 255.255.255.0.

3.Select Gateway tab. Enter the router’s IP address 192.168.1.1. Click Add. If your ISP specifies DNS server addresses, go to the tab DNS Configuration. Enter the specified addresses according to the ISP’s instructions.

4.Click OK & then OK to finish. The system may ask to read the

Windows CD, and then ask to restart the computer.

You have now finished with configuring your computer.

Go to Section 5 – Getting On-line.

5Getting On-lineIt takes only 2 easy steps.STEP1 GO TO THE ‘CONNECT TO INTERNET’ PAGE

Start your web browser. Enter the default address http://192.168.1.1. Type admin for both User name and Password.

See Q1 in Section 10 - Troubleshooting if you cannot get this screen.

Next you will be in the Quick Start >

Connect to Internet page.

If your ISP specifies that your ADSL service is PPPoE, you must now follow Section 6 to change the router’s connect mode to PPPoE. Check with

your ISP if you are unsure of the type of service you have subscribed to.