10 DX-19LD150A11

Making connections

Using coaxial cable (good)

To connect a cable or satellite box using coaxial cable:

1Turn off your TV/DVD combo and all connected equipment.

2Connect the incoming cable from the cable wall jack to the cable-in jack on the cable or satellite box.

3Connect a coaxial cable (not provided) to the ANT/CABLE IN jack on the back of your TV/DVD combo and to the coaxial out jack on the cable or satellite box.

Cable or satellite box

From cable TV wall jack (75 ohm)

To Cable-in jack on the cable TV or satellite box

Coaxial cable

PB

PR

Back of TV/DVD combo

4Turn on your TV/DVD combo, then turn on the cable or satellite box.

5Go through the setup wizard described on page 16.

Notes

• Use a coaxial cable to eliminate interference and noise from radio waves.

• Do not bundle the coaxial cable with the power cord or other cables.

Connecting an antenna or cable TV (no box)

To connect an antenna or cable TV (no box):

1Turn off your TV/DVD combo and all connected equipment.

2Connect a coaxial cable to the ANT/CABLE IN jack on the back of your TV/DVD combo and to the antenna or cable TV wall jack.

Coaxial cable

Back of TV/DVD combo

PB

PR

3Turn on your TV/DVD combo, then go through the setup wizard described on page 16.

Notes

•Use a coaxial cable to eliminate interference and noise from radio waves.

•Do not bundle the coaxial cable with the power cord or other cables.

•If the antenna is not installed correctly, contact qualified service personnel to correct the

problem.