Adjusting the sound

DX-19LD150A11 23

Adjusting the sound

Selecting the sound mode or audio language

To select an audio language in digital TV mode:

Press SAP repeatedly to select an audio language (if available).

To select the sound mode in analog TV mode:

Press SAP repeatedly to cycle through the audio sound mode. The options available depend on your TV provider. You can select:

Mono—Select this option if there is noise or static from a weak broadcast signal.

Stereo—Select this option for programs broadcast in stereo sound.

SAP—Select this option to enable audio in an alternative language.

MTS Audio: Stereo

Adjusting the sound settings

To adjust the sound settings:

1Press MENU. The on-screen menu opens with the Picture menu displayed.

2Press ￿ or ￿ to highlight Audio. The Audio menu opens. Press ￿ or ENTER/ to access the menu.

3Press ￿ or ￿ to highlight an option, then press ￿ or

￿to adjust the setting. You can select:

Mode—Selects the EQ sound mode. You can select Standard, Theater, Music, News, or Custom.

Note

You can also press AUDIO to select the audio mode.

Balance—Adjusts the balance between the left and right audio channels.

Auto Volume—Adjusts the volume to keep the volume level consistent when switching channels or when switching from a TV show to a commercial. You can select On or Off.

Advanced Audio—Opens the Advanced Audio sub-menu.

You can select:

Digital Audio/SPDIF—Selects the preferred audio format for digital audio signals. Options include PCM and RAW.

Audio Language—Selects the default language track when watching digital TV programs. Options include English, Français (French), and Español (Spanish).

MTS/SAP—Selects the default language stream when watching analog or digital TV channels. See "Selecting the sound mode or audio language" on page 23.

Speakers—Selects the TV audio output source. If an external audio amplifier is connected to your TV/DVD combo, select External to output the TV sound from the amplifier.

Reset Audio Settings— Resets all audio settings to factory defaults.

4Press EXIT to close the menu.

Playing TV audio only

You can turn off the picture on your TV/DVD combo and listen to the program audio only.

To play TV audio only:

1Press MENU. The on-screen menu opens with the Picture menu displayed.

2Press ￿ or ￿ to highlight Channel. The Channel menu opens. Press ￿ or ENTER/ to access the menu.

Treble—Adjusts the high sounds.

Bass—Adjusts the low sounds.