22 DX-19LD150A11

Adjusting the picture

•Overscan—This feature extends part of the display past the visible area of the screen. The resulting picture will “zoom in” on the image center.

•Color Temperature—Selects the color temperature. You can select Cool (to enhance the blues), Normal, or Warm (to enhance the reds).

•Noise Reduction—Selects the noise reduction mode to reduce picture noise (snow). You can select Low, Middle, High, or Off.

•Adaptive Contrast—Automatically adjusts picture detail and brightness. You can select On or Off.

•DCR—Enhances the contrast ratio between light and dark areas of the picture. You can select On or Off.

•Reset Picture Settings—Resets all picture settings to factory default.

4Press EXIT to close the menu.

Setting power on vivid mode

If you select Retail Mode from the Setup Wizard to use your TV/DVD combo for in-store display, you can set vivid mode as your power on default, regardless of the picture mode you select when turning off the TV/DVD combo.

Note

If you select Home Mode from the Setup Wizard, you cannot set power on vivid mode.

To set power on vivid mode:

1Press MENU. The on-screen menu opens with the Picture menu displayed.

5Press EXIT to close the menu.

Note

If you select Off, the power on picture mode depends on your last selection.

Adjusting the computer image

To adjust the computer image:

1Make sure that your TV/DVD combo is in VGA mode. For more information, see “Selecting the video input

source” on page 17.

2Press MENU. The on-screen menu opens with the Picture menu displayed.

3Press ￿ or ￿ to highlight Settings. The Settings menu opens. Press ￿ or ENTER/ to access the

menu.

4Press ￿ or ￿ to highlight VGA Settings, then press ENTER/.

2Press ￿ or ￿ to highlight Settings. The Settings menu opens. Press ￿ or ENTER/ to access the menu.

3Press ￿ or ￿ to highlight Menu Settings, then press ENTER/.

4Press ￿ or ￿ to highlight Power On In Vivid Mode, then press ￿ or ￿ to select On.

Picture Audio Settings Channel

LanguageEnglish

Transparency

0

Power On In Vivid Mode

On

SelectMove Return

Open Source Notice

Reset to Default

5The VGA Settings sub-menu opens. Press ￿ or ￿ to highlight an option, then press ￿ or ￿ to adjust the option.

You can select:

•Auto Adjust—Automatically adjusts the image settings such as position and phase.

•H. Position—Moves the image right or left.

•V. Position—Moves the image up or down.

•Clock—Adjusts the sample frequency.

•Phase—Adjusts the focus of stable images.

6Press EXIT to close the menu.