Making connections

DX-19LD150A11

9

Using component video cable (better)

To connect a cable or satellite box using component video:

1Turn off your TV/DVD combo and all connected

equipment.

2Connect the incoming cable from the cable wall jack

to the cable-in jack on the cable or satellite box.

3Connect a component video cable (provided) to the COMPONENT IN/Y, PB, PR jacks on the back of your TV/DVD combo and to the component video out jacks on the cable or satellite box.

Cable or satellite box

From cable TV

To Cable-in jack on thewall jack (75 ohm) cable TV or satellite box

Using composite video cable (good)

To connect a cable or satellite box using composite video:

1Turn off your TV/DVD combo and all connected

equipment.

2Connect the incoming cable from the cable wall jack

to the cable-in jack on the cable or satellite box.

3Connect an A/V cable (not provided) to the VIDEO IN/VIDEO 1, and L, R jacks on the back of your TV/DVD combo and to the composite video and audio out jacks on the cable or satellite box.

Cable or satellite box

To Cable-in jack on the

 

From cable TV

cable TV or satellite box

 

wall jack (75 ohm)

 

 

 

 

 

 

 

 

 

 

cable

Component video cable

Audio

 

PB

PR

Back of TV/DVD combo

Cables are often color-coded to match color-coded jacks.

Back of TV/DVD combo

cableA/V PB

PR

4Turn on your TV/DVD combo, then turn on the cable

4Connect an audio cable (provided) to the L, R audio jacks on the back of your TV/DVD combo and to the audio out jacks on the cable or satellite TV box.

5Turn on your TV/DVD combo, then turn on the cable or satellite box.

6Go through the setup wizard described on page 16.

7 To watch TV, press INPUT to open the INPUT SOURCE list, then press INPUT repeatedly, or press ￿ or ￿ to select Component, then press ENTER/.

or satellite box.

5Go through the setup wizard described on page 16.

6 To watch TV, press INPUT to open the INPUT SOURCE list, then press INPUT repeatedly, or press ￿ or ￿ to

select A/V, then press ENTER/.