Manuals / Brands / Computer Equipment / Network Router / Dynex / Computer Equipment / Network Router

Dynex DX-WEGRTR, DX-WGRTR Question 8: How do I manually configure my network settings?

1 15

Download 15 pages, 459.29 Kb

5

V1 13-0021

Question 8: How do I manually configure my network settings?

In order for your computer to properly communicate with your router, change your PC’s TCP/IP settings to

DHCP.

Note: The Dynex Wireless G Router and Wireless Enhanced G Router have been discontinued.

Windows® 7 and Windows® 8 operating systems have not been tested with these routers. The routers

may function normally with these operating systems; however, that usage is not supported by customer

support.

To manually configure network settings in Windows Vista®, Windows® XP, or Windows® 2000:

1. Click Start, then open the Control Panel.

2. Double-click the Network and dial-up connections icon (Windows 2000) or the Network icon

(Windows XP or Vista).

3. Right-click the Local Area Connection associated with your network adapter, then select

Properties from the list. The Local Area Connection Properties window opens.

4. Select Internet Protocol (TCP/IP) from the list, then click Properties. Internet Protocol

Properties window opens.

5. Select Obtain an IP address automatically and Obtain DNS server address automatically,

then click OK. Your network adapter(s) are now configured for use with the router.

Note: If Use the following IP address is selected, set up your router for a static IP connection

type. Write the address information down. You will need to enter this information into the router.

See Question 18 for information on accessing your wireless router’s settings.

Contents

Main Dynex Wirel ess G Route r (DX-WGRT R) & Wireless En hanced G Ro uter (DX- WEGRTR) FAQ Setup Question 1: Where do I place my wireless router? Question 2: How do I connect my router to the modem? Question 3: How do I set up a wireless network? Question 4: What should I do if the Easy Install Wizard does not run? Question 5: What should I do if the Easy Install Wizard cannot find my wireless router? Page Question 8: How do I manually configure my network settings? Page Question 9: How do I change my wireless network channel? Question 10: How do I change my wireless routers name? Question 11: How do I set up a wireless network without the Easy Install Wizard? Question 12: How do I connect to the wireless network? Question 13: How do I connect my cell phone, game system, or other WiFi device to the network? Question 14: What should I do if I cant connect to the Internet wirelessly? Usage Question 15: What is my wireless routers range? Question 16: How do I extend the range of my wireless network? Question 17: What should I do if I forgot the password to my wireless network? Question 18: How do I access my wireless routers settings? Security Question 21: How do I save my current configuration? Question 22: How do I restore a previous configuration? Question 23: How do I update my wireless routers firmware? Question 24: How do I reset my router? Question 25: How do I restore the factory settings? Question 26: Which encryption method should I use to secure my wireless network? Question 27: How do I secure my wireless network? General Question 28: What are the system requirements to use the router? Question 29: Where can I get more information about the Dynex Wireless G Router? Question 30: Where can I find more information about my warranty?