Setting up your wireless router

15

To connect your router (step 1):

1Turn off the power to your modem by unplugging the power supply from the modem.

2Locate the network cable that is connected between your modem and your computer and unplug it from your computer, leaving the other end connected to your modem.

3Plug the loose end of the cable you just unplugged into the port on the back of the router labeled Modem.

4Connect a new network cable (not included) from the back of the computer to one of the wired computer ports labeled 1-4. Note: It does not matter which numbered port you choose.

5Turn your cable or DSL modem on by reconnecting the power supply to the modem.

6 Plug the power cord into the wall, then plug the cord into the router's power jack.

7Make sure that your modem is connected to the router by checking the lights on the front of the router. The green light labeled Modem should be on if your modem is connected correctly to the router. If it is not, recheck your connections.

8Make sure that your computer is connected properly to the router by checking the lights labeled 1-4. The light that corresponds to the numbered port connected to your computer should be on if your computer is connected properly. If it is not, recheck your connections.

To set up your computer's network settings to work with a DHCP server:

• See “Manually configuring network settings” on page 43 for directions.

Configuring the router using the Web-Based Advanced User Interface:

1Open your Internet browser, the access the router's Web-Based Advanced User Interface by typing “192.168.2.1” in the address line (you do not need to type in anything else such as “http://” or “www”), then press Enter. The router's home page opens.

Note: If you have difficulty accessing the Router's Web-Based Advanced User Interface, go to the section entitled “Manually Configuring Network Settings”.

2To make any changes to the router's settings, you have to log in. Click Login, or click on any one of the links on the home page to go to the login screen.

3In the login screen, leave the password blank (the router ships with no password entered) and click Submit to log in.

One computer at a time can log into the router for the purposes of making changes to the settings of the router.

4After you have logged in to make changes, there are two ways that the computer can be logged out. Clicking Logout will log the computer out.

- OR -

5The login will time out after a specified period of time. The default login time-out is 10 minutes. This can be changed from 1 to 99 minutes. For more information, see “Changing the Login Time-Out Setting” on page 41.