Product features

7

Back panel

12

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

3

 

4

 

 

 

 

 

 

 

#

Component

 

 

Description

 

 

 

 

 

 

 

1

Wired computer

Connect your wired (non-wireless) computers to these ports. These ports are RJ-45,

 

ports - Blue

10/100 auto-negotiation, auto-uplinking ports for standard UTP category 5 or 6

 

 

 

Ethernet cable. The ports are labeled 1 through 4. These ports correspond to the

 

 

 

numbered LEDs on the front of the router.

 

 

 

 

 

 

 

 

 

 

2

Power jack

The 5 V DC power supply plugs into this jack.

 

 

 

 

 

 

 

 

 

3

Modem port - Green

This port is for connection to your cable or DSL modem. Use the cable that was

 

 

 

provided with the modem to connect the modem to this port. Use of a cable other

 

 

 

than the cable supplied with the cable modem may not work properly.

 

 

 

 

 

 

 

4

Reset button

The Reset button is used in rare cases when the router may function improperly.

 

 

 

Resetting the router restores the router's normal operation while maintaining the

 

 

 

programmed settings. You can also restore the factory default settings by using the

 

 

 

Reset button. Use the restore option in instances where you may have forgotten your

 

 

 

custom password.

 

 

 

 

 

Resetting the router—Push and release the Reset button. The lights on the

 

 

 

router will momentarily flash. The Power/Ready light will begin to blink. When the

 

 

 

Power/Ready light becomes solid again, the reset is complete.

 

 

 

Restoring the Factory Defaults—Press and hold the Reset button for at least 10

 

 

 

seconds, then release it. The lights on the router will momentarily flash. The Power/

 

 

 

Ready light will begin to blink. When the Power/Ready light becomes solid again,

 

 

 

the restore is complete.