Built-In Dynamic Host Configuration Protocol (DHCP)—Built-In Dynamic Host Configuration Protocol (DHCP) on-board makes for the easiest possible connection of a network. The DHCP server will assign IP addresses to each computer automatically so there is no need for a complicated networking setup.
Easy Install Wizard—The Easy Install Wizard takes the guesswork out of setting up your Router. This automatic software determines your network settings for you and sets up the Router for connection to your Internet Service Provider (ISP). In a matter of minutes, your wireless router will be up and running on the Internet.
Note: Easy Install Wizard software is compatible with Windows 2000, XP, Vista, and Mac OS Mac OSx 10.4.x. If you are using another operating system, the Wireless Router can be set up using the Alternate Setup Method described in this User Guide (see Alternate setup method on page 14.
Integrated 802.11g Wireless Access Point—802.11g is an exciting new wireless technology that achieves data rates up to 54 Mbps, nearly five times faster than 802.11b.
MAC Address Filtering—For added security, you can set up a list of MAC addresses (unique client identifiers) that are allowed access to your network. Every computer has its own MAC address. Simply enter these MAC addresses into a list using the Web-Based Advanced User Interface and you can control access to your network.
Package contents
•Dynex Wireless G Router
•Quick Installation Guide
•Installation software CD
•RJ-45 Ethernet cable
•Power supply
•User Guide
System requirements
•Broadband Internet connection such as a cable or DSL modem with RJ45 (Ethernet) connection
•At least one computer with an installed network interface adapter
•TCP/IP networking protocol installed on each computer
•RJ-45 Ethernet networking cable
•Internet browser
Easy Install Wizard Software System Requirements
•A PC running Windows 2000, Windows XP, or Windows Vista, or a Mac computer running Mac OSx 10.4x
•A minimum 64 MB RAM
•An Internet browser
