Eagle Electronics 500C Edit a Waypoint, Selecting a Waypoint, Waypoint Name, Waypoint Position

Edit a Waypoint

Waypoint Name

To edit waypoint name:

1.Press WPT↑ to MY WAYPOINTSENT↓ to nameENT. Choose desired waypoint from the list by using ↑ or ↓ to select first character then press → to choose the next character. After the desired waypoint is highlighted in the list, press ENTENT to access waypoint information screen.

2.Use → to select EDIT WAYPOINT from the bottom menu, then press ENTENT. Modify the name by pressing ↑ or ↓ and →. Once the new name is set press ENT EXITEXITEXITEXIT to return to the previ- ous page display.

Waypoint Symbol

To edit waypoint symbol:

1.Press WPT↑ to MY WAYPOINTSENT↓ to nameENT. Select waypoint from the list then press ENTENT. Use → to select EDIT WAYPOINT from bottom menu. Then pressENT↓ to ALTITUDE→ to CHOOSE SYMBOLENT.

2.Use arrow keys to select desired symbol and press ENT. To return to the previous page, press EXITEXITEXITEXIT.

Waypoint Position

To edit waypoint position:

1.Press WPT↑ to MY WAYPOINTSENT↓ to nameENT. Then repeat steps above to access waypoint information screen. Select EDIT WAYPOINT, press ENT.

2.Latitude: press ↓ to LATITUDEENT. Press ↑ or ↓ to change the first character, then press → to the next character and repeat until the lati- tude is correct. Press EXIT.

3.Longitude: press ↓ to LONGITUDEENT. Press ↑ or character, then press → to the next character and gitude is correct. Press EXIT.

↓to change the first repeat until the lon-

4.When latitude and longitude are correct, return to the previous page: press EXITEXITEXITEXIT.

Selecting a Waypoint

To select a waypoint on the map (for navigating to, for editing, etc.,) use the arrow keys and center the cursor over the waypoint. A highlighted halo will appear around the waypoint.

137