
Sonar Alarms menu with Fish Alarm selected. The check box to the left
is blank, indicating the alarm is turned off.
To turn the fish alarm on:
1.Press MENUMENU↓ to ALARMSENT↓ to SONAR ALARMSENT.
2.Press ↓ to FISH ALARMENTEXITEXITEXIT.
3.To turn off the alarm, press MENUMENU↓ to ALARMSENT↓ to
SONAR ALARMSENT↓ to FISH ALARMENTEXITEXITEXIT.
Calibrate Speed
The speed sensor can be calibrated to compensate for inaccuracies. Be- fore you change the setting, first calculate the percentage that the speed is off. You will enter this percentage in a moment.
For example, if you figure the sensor is reading 10 percent faster than actual speed, you will enter – 10 in the calibration window. If the sen- sor is reading 5 percent slower than true speed, you will enter + 5 in the window.
A good way to gauge your speed sensor's performance is to compare its reading with the ground speed measured by your unit's GPS functions. When you make a run to compare GPS ground speed to speed sensor speed, perform your test in relatively calm water free of current, if pos- sible. (Unless, of course, you are taking the current speed into consid- eration when making your calculation.) After you have a correction fig- ure, here's how to enter it:
1.Press MENUMENU↓ to SONAR SETUPENT↓ to CALIBRATE WATER
SPEEDENT.
2.Enter the number you calculated earlier: press ↑ or ↓ to change the first character (+ or
57