Eagle Electronics 500C manual Coordinate System Selection, Press MENUMENU↓ to GPS Setupent

•GSA and GSV transmits fix mode, DOP values, and satellites in view information.

•DBT transmits the depth below the transducer.

•DPT transmits the depth

•MTW transmits the water temperature.

•VLW transmits the distance traveled through water as meas- ured by the paddle wheel.

•VHW transmits the water speed as measured by the paddle wheel.

4.When the desired prefixes are checked or unchecked, press

EXITEXITEXITEXIT to return to the previous page.

Coordinate System Selection

The Coordinate System Menu lets you select the coordinate system to use when displaying and entering position coordinates.

Menus for changing coordinate system used to display positions.

To get to Coordinate System Selection:

1.Press MENUMENU↓ to GPS SETUPENT.

2.Press ↓ to COORDINATE SYSTEMENT.

This unit can show a position in degrees (36.14952°); degrees, minutes and thousandths of a minute (36° 28.700'); or degrees, minutes, seconds and tenths of a second (36° 28' 40.9"). It can also show position in: UTM (Universal Transverse Mercator) projection; MGRS (Standard); MGRS (Standard + 10); Map Fix; Loran TD; British, Irish, Finnish, German,

142