Eagle Electronics 500C manual Hide GPS Features, Initialize GPS, Map Auto Zoom

Models: 500C

1 204
Download 204 pages 38.37 Kb
Page 155
Image 155

3.Begin navigating along the trail/route. (If you are close enough to the first waypoint, the arrival alarm will usually go off as soon as naviga-

tion begins. Press EXIT to clear the alarm.) When navigation starts, press to increase speed to the desired setting.

4.Press EXIT to turn off the steering and speed boxes. The unit will now automatically "steer" along the trail or route. When you arrive at your "destination," cancel navigation as you normally do.

Tip:

You can pick any spot on the map to begin your simulation session by using the Initialize GPS command. This makes your unit think it's located at the position you select. See its entry following the en- try for Hide GPS Features.

Hide GPS Features

If there is no GPS antenna/receiver module attached to this unit, the GPS menus and features can be hidden from view with this command. The default setting is off, allowing you to rotate between the Sonar Page and the GPS pages and features. To hide GPS features:

Press MENUMENUto SYSTEM SETUPENTto HIDE GPS FEATURESENT. The GPS menus and pages are now hidden.

To restore GPS Features, press MENUMENUto SHOW GPS FEA- TURESENT. The GPS menus and pages are available once again.

Initialize GPS

This command is handy when you are practicing in simulator mode. (See the entry in this section for GPS Simulator.) In simulator mode, this command makes the unit operate as if it is sitting someplace other than its actual location. So, you and your unit could be located in Kansas City, but easily practice navigating in the ocean off Islamorada, Florida.

1.Press MENUMENUto GPS SETUPENTENT.

2.A message appears, telling you to move the cursor near the desired location and press ENT. When the message automatically clears, follow the message instructions.

3.In a moment, your present position marker arrow appears on the map in the location you selected with the cursor. The unit will consider that spot as its last known position until changed by either a live satel- lite lock-on or a new simulator location.

Map Auto Zoom

This receiver has an auto zoom feature that eliminates much of the but- ton pushing that other brands of GPS receivers force you to make. It 147

Page 155
Image 155
Eagle Electronics 500C manual Hide GPS Features, Initialize GPS, Map Auto Zoom, Press MENUMENU↓ to GPS Setupentent