Eaton Electrical QSNAP Environmental Ratings, Approvals/Certifications, Catalog Numbering System

Intelligent Technologies (IT.) QSNAP

February 2002

Environmental Ratings

The following environmental ratings apply to the QSNAP.

Table 3: Environmental Ratings

Category	Description	Specification
Transportation	Temperature	-50°C to 80°C [-58°F to 176°F]
	Humidity	95% non-condensing
Storage	Temperature	-50°C to 80°C [-58°F to 176°F]
	Humidity	95% non-condensing
Operating	Temperature	-30°C to 55°C [-22°F to 131°F]
	Humidity	95% non-condensing
	Altitude	Above 2000 meters [6600 feet] consult factory
	Shock	15 g’s half-wave sinusoidal 11 msecs
	Vibration	5 – 57.5 Hz (100 – 17 msecs) @ 0.3 mm SA
		57.5 – 150 Hz (17 – 6.7 msecs) @ 0.35 mm SA
	Enclosure	IP20

Approvals/Certifications

The following approvals and certifications apply to the QSNAP.

Table 4: Approvals/Certifications

Standard

Approval/Certification

UL

CE

CSA

UL508

CSAC22.2 No. 14-95

Catalog Numbering System

There is only one catalog number for QCPort connection to Eaton’s Cutler-Hammer Intelligent Technologies (IT.) Electromechanical Starters. These starters include those listed in Table 1 on Page 1.

The catalog number is QSNAP.

This part number includes the QSNAP and the starter interface board that connects the starter and the QSNAP.

Note: When ordering QSNAP for Full Voltage Reversing, consult factory for the QSNAP Auxiliary contact and jumper catalog numbers.

Note: When ordering a ground fault detector, consult factory for catalog number.

4 Pub. No. MN05001001E