Intelligent Technologies (IT.) QSNAP
February 2002
Configuration
The only configuration that is necessary for normal operation of the QSNAP is setting the Group ID and SW1 positions A and B, as described in the “Installation” section. However, the QSNAP offers a variety of enhanced features. When these features are required, use the CH Studio application or a tool that can read an EDS file to perform the configuration.
Using CH Studio
The CH Studio software application is designed for programming and configuring industrial automation systems. The application simplifies the monitoring and configuration of entire networks as well as the enhanced features of individual IT. communicating devices within those networks.
CH Studio takes advantage of the Windows graphical interface to present a suite of tools that is easy to learn and efficient to use, while meeting the requirements for developing complex network configurations.
CH Studio performs the following configuration functions for DeviceNet and QCPort networks:
●Discover network devices
●Display device properties
●Monitor and configure network devices
●Save existing network configurations
●Configure networks
●Configure devices
14 | Pub. No. MN05001001E |
